diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 55d33500d55e..744e84228a1f 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1338,7 +1338,9 @@ static int set_input_params(struct psmouse *psmouse, if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && !SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10)) __set_bit(INPUT_PROP_TOPBUTTONPAD, dev->propbit); - } + } else if (SYN_CAP_CLICKPAD2BTN(info->ext_cap_0c) || + SYN_CAP_CLICKPAD2BTN2(info->ext_cap_0c)) + __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); return 0; } diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index fc00e005c611..4cfbeec3ae4c 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -86,6 +86,7 @@ */ #define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & BIT(20)) /* 1-button ClickPad */ #define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & BIT(8)) /* 2-button ClickPad */ +#define SYN_CAP_CLICKPAD2BTN2(ex0c) ((ex0c) & BIT(21)) /* 2-button ClickPad */ #define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & BIT(17)) #define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & BIT(13)) #define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & BIT(19)) diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 97a420c11eed..c8621e9b2e4a 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -159,6 +159,13 @@ config INPUT_ADBHID If unsure, say Y. +config ADB_TRACKPAD_ABSOLUTE + bool "Enable absolute mode for adb trackpads" + depends on INPUT_ADBHID + help + Enable absolute mode in adb-base trackpads. This feature adds + compatibility with synaptics Xorg / Xfree drivers. + config MAC_EMUMOUSEBTN tristate "Support for mouse button 2+3 emulation" depends on SYSCTL && INPUT diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index a261892c03b3..a85192de840c 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -262,6 +262,15 @@ static struct adb_ids buttons_ids; #define ADBMOUSE_MS_A3 8 /* Mouse systems A3 trackball (handler 3) */ #define ADBMOUSE_MACALLY2 9 /* MacAlly 2-button mouse */ +#ifdef CONFIG_ADB_TRACKPAD_ABSOLUTE +#define ABS_XMIN 310 +#define ABS_XMAX 1700 +#define ABS_YMIN 200 +#define ABS_YMAX 1000 +#define ABS_ZMIN 0 +#define ABS_ZMAX 55 +#endif + static void adbhid_keyboard_input(unsigned char *data, int nb, int apoll) { @@ -405,6 +414,9 @@ static void adbhid_mouse_input(unsigned char *data, int nb, int autopoll) { int id = (data[0] >> 4) & 0x0f; +#ifdef CONFIG_ADB_TRACKPAD_ABSOLUTE + int btn = 0; int x_axis = 0; int y_axis = 0; int z_axis = 0; +#endif if (!adbhid[id]) { pr_err("ADB HID on ID %d not yet registered\n", id); @@ -436,6 +448,17 @@ adbhid_mouse_input(unsigned char *data, int nb, int autopoll) high bits of y-axis motion. XY is additional high bits of x-axis motion. + For ADB Absolute motion protocol the data array will contain the + following values: + + BITS COMMENTS + data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. + data[1] = byyy yyyy Left button and y-axis motion. + data[2] = bxxx xxxx Second button and x-axis motion. + data[3] = 1yyy 1xxx Half bits of y-axis and x-axis motion. + data[4] = 1yyy 1xxx Higher bits of y-axis and x-axis motion. + data[5] = 1zzz 1zzz Higher and lower bits of z-pressure. + MacAlly 2-button mouse protocol. For MacAlly 2-button mouse protocol the data array will contain the @@ -458,8 +481,17 @@ adbhid_mouse_input(unsigned char *data, int nb, int autopoll) switch (adbhid[id]->mouse_kind) { case ADBMOUSE_TRACKPAD: +#ifdef CONFIG_ADB_TRACKPAD_ABSOLUTE + x_axis = (data[2] & 0x7f) | ((data[3] & 0x07) << 7) | + ((data[4] & 0x07) << 10); + y_axis = (data[1] & 0x7f) | ((data[3] & 0x70) << 3) | + ((data[4] & 0x70) << 6); + z_axis = (data[5] & 0x07) | ((data[5] & 0x70) >> 1); + btn = (!(data[1] >> 7)) & 1; +#else data[1] = (data[1] & 0x7f) | ((data[1] & data[2]) & 0x80); data[2] = data[2] | 0x80; +#endif break; case ADBMOUSE_MICROSPEED: data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7); @@ -485,17 +517,39 @@ adbhid_mouse_input(unsigned char *data, int nb, int autopoll) break; } - input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); - input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); +#ifdef CONFIG_ADB_TRACKPAD_ABSOLUTE + if ( adbhid[id]->mouse_kind == ADBMOUSE_TRACKPAD ) { - if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD) - input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); + if(z_axis > 30) input_report_key(adbhid[id]->input, BTN_TOUCH, 1); + if(z_axis < 25) input_report_key(adbhid[id]->input, BTN_TOUCH, 0); - input_report_rel(adbhid[id]->input, REL_X, - ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 )); - input_report_rel(adbhid[id]->input, REL_Y, - ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 )); + if(z_axis > 0){ + input_report_abs(adbhid[id]->input, ABS_X, x_axis); + input_report_abs(adbhid[id]->input, ABS_Y, y_axis); + input_report_key(adbhid[id]->input, BTN_TOOL_FINGER, 1); + input_report_key(adbhid[id]->input, ABS_TOOL_WIDTH, 5); + } else { + input_report_key(adbhid[id]->input, BTN_TOOL_FINGER, 0); + input_report_key(adbhid[id]->input, ABS_TOOL_WIDTH, 0); + } + + input_report_abs(adbhid[id]->input, ABS_PRESSURE, z_axis); + input_report_key(adbhid[id]->input, BTN_LEFT, btn); + } else { +#endif + input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); + + if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD) + input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); + input_report_rel(adbhid[id]->input, REL_X, + ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 )); + input_report_rel(adbhid[id]->input, REL_Y, + ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 )); +#ifdef CONFIG_ADB_TRACKPAD_ABSOLUTE + } +#endif input_sync(adbhid[id]->input); } @@ -849,6 +903,15 @@ adbhid_input_register(int id, int default_id, int original_handler_id, input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); +#ifdef CONFIG_ADB_TRACKPAD_ABSOLUTE + set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_X, ABS_XMIN, ABS_XMAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, ABS_YMIN, ABS_YMAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, ABS_ZMIN, ABS_ZMAX, 0, 0); + set_bit(BTN_TOUCH, input_dev->keybit); + set_bit(BTN_TOOL_FINGER, input_dev->keybit); + set_bit(ABS_TOOL_WIDTH, input_dev->absbit); +#endif break; case ADB_MISC: @@ -1132,7 +1195,11 @@ init_trackpad(int id) r1_buffer[3], r1_buffer[4], r1_buffer[5], +#ifdef CONFIG_ADB_TRACKPAD_ABSOLUTE + 0x00, /* Enable absolute mode */ +#else 0x03, /*r1_buffer[6],*/ +#endif r1_buffer[7]); /* Without this flush, the trackpad may be locked up */ diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index ac4d48830415..b272132ac742 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -573,9 +573,28 @@ config THINKPAD_ACPI_HOTKEY_POLL If you are not sure, say Y here. The driver enables polling only if it is strictly necessary to do so. +config THINKPAD_EC + tristate + ---help--- + This is a low-level driver for accessing the ThinkPad H8S embedded + controller over the LPC bus (not to be confused with the ACPI Embedded + Controller interface). + +config TP_SMAPI + tristate "ThinkPad SMAPI Support" + select THINKPAD_EC + default n + help + This adds SMAPI support on Lenovo/IBM ThinkPads, for features such + as battery charging control. For more information about this driver + see . + + If you have a Lenovo/IBM ThinkPad laptop, say Y or M here. + config SENSORS_HDAPS tristate "Thinkpad Hard Drive Active Protection System (hdaps)" depends on INPUT + select THINKPAD_EC help This driver provides support for the IBM Hard Drive Active Protection System (hdaps), which provides an accelerometer and other misc. data. diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 2ba6cb795338..399f8b88646f 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -65,6 +65,8 @@ obj-$(CONFIG_IBM_RTL) += ibm_rtl.o obj-$(CONFIG_IDEAPAD_LAPTOP) += ideapad-laptop.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o +obj-$(CONFIG_THINKPAD_EC) += thinkpad_ec.o +obj-$(CONFIG_TP_SMAPI) += tp_smapi.o # Intel obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o diff --git a/drivers/platform/x86/thinkpad_ec.c b/drivers/platform/x86/thinkpad_ec.c new file mode 100644 index 000000000000..597614bc17e6 --- /dev/null +++ b/drivers/platform/x86/thinkpad_ec.c @@ -0,0 +1,513 @@ +/* + * thinkpad_ec.c - ThinkPad embedded controller LPC3 functions + * + * The embedded controller on ThinkPad laptops has a non-standard interface, + * where LPC channel 3 of the H8S EC chip is hooked up to IO ports + * 0x1600-0x161F and implements (a special case of) the H8S LPC protocol. + * The EC LPC interface provides various system management services (currently + * known: battery information and accelerometer readouts). This driver + * provides access and mutual exclusion for the EC interface. +* + * The LPC protocol and terminology are documented here: + * "H8S/2104B Group Hardware Manual", + * http://documentation.renesas.com/eng/products/mpumcu/rej09b0300_2140bhm.pdf + * + * Copyright (C) 2006-2007 Shem Multinymous + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) + #include +#else + #include +#endif + +#define TP_VERSION "0.42" + +MODULE_AUTHOR("Shem Multinymous"); +MODULE_DESCRIPTION("ThinkPad embedded controller hardware access"); +MODULE_VERSION(TP_VERSION); +MODULE_LICENSE("GPL"); + +/* IO ports used by embedded controller LPC channel 3: */ +#define TPC_BASE_PORT 0x1600 +#define TPC_NUM_PORTS 0x20 +#define TPC_STR3_PORT 0x1604 /* Reads H8S EC register STR3 */ +#define TPC_TWR0_PORT 0x1610 /* Mapped to H8S EC register TWR0MW/SW */ +#define TPC_TWR15_PORT 0x161F /* Mapped to H8S EC register TWR15. */ + /* (and port TPC_TWR0_PORT+i is mapped to H8S reg TWRi for 00x%02x", \ + msg, args->val[0x0], args->val[0xF], code) + +/* State of request prefetching: */ +static u8 prefetch_arg0, prefetch_argF; /* Args of last prefetch */ +static u64 prefetch_jiffies; /* time of prefetch, or: */ +#define TPC_PREFETCH_NONE INITIAL_JIFFIES /* No prefetch */ +#define TPC_PREFETCH_JUNK (INITIAL_JIFFIES+1) /* Ignore prefetch */ + +/* Locking: */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) +static DECLARE_MUTEX(thinkpad_ec_mutex); +#else +static DEFINE_SEMAPHORE(thinkpad_ec_mutex); +#endif + +/* Kludge in case the ACPI DSDT reserves the ports we need. */ +static bool force_io; /* Willing to do IO to ports we couldn't reserve? */ +static int reserved_io; /* Successfully reserved the ports? */ +module_param_named(force_io, force_io, bool, 0600); +MODULE_PARM_DESC(force_io, "Force IO even if region already reserved (0=off, 1=on)"); + +/** + * thinkpad_ec_lock - get lock on the ThinkPad EC + * + * Get exclusive lock for accesing the ThinkPad embedded controller LPC3 + * interface. Returns 0 iff lock acquired. + */ +int thinkpad_ec_lock(void) +{ + int ret; + ret = down_interruptible(&thinkpad_ec_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(thinkpad_ec_lock); + +/** + * thinkpad_ec_try_lock - try getting lock on the ThinkPad EC + * + * Try getting an exclusive lock for accesing the ThinkPad embedded + * controller LPC3. Returns immediately if lock is not available; neither + * blocks nor sleeps. Returns 0 iff lock acquired . + */ +int thinkpad_ec_try_lock(void) +{ + return down_trylock(&thinkpad_ec_mutex); +} +EXPORT_SYMBOL_GPL(thinkpad_ec_try_lock); + +/** + * thinkpad_ec_unlock - release lock on ThinkPad EC + * + * Release a previously acquired exclusive lock on the ThinkPad ebmedded + * controller LPC3 interface. + */ +void thinkpad_ec_unlock(void) +{ + up(&thinkpad_ec_mutex); +} +EXPORT_SYMBOL_GPL(thinkpad_ec_unlock); + +/** + * thinkpad_ec_request_row - tell embedded controller to prepare a row + * @args Input register arguments + * + * Requests a data row by writing to H8S LPC registers TRW0 through TWR15 (or + * a subset thereof) following the protocol prescribed by the "H8S/2104B Group + * Hardware Manual". Does sanity checks via status register STR3. + */ +static int thinkpad_ec_request_row(const struct thinkpad_ec_row *args) +{ + u8 str3; + int i; + + /* EC protocol requires write to TWR0 (function code): */ + if (!(args->mask & 0x0001)) { + printk(KERN_ERR MSG_FMT("bad args->mask=0x%02x", args->mask)); + return -EINVAL; + } + + /* Check initial STR3 status: */ + str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK; + if (str3 & H8S_STR3_OBF3B) { /* data already pending */ + inb(TPC_TWR15_PORT); /* marks end of previous transaction */ + if (prefetch_jiffies == TPC_PREFETCH_NONE) + printk(KERN_WARNING REQ_FMT( + "EC has result from unrequested transaction", + str3)); + return -EBUSY; /* EC will be ready in a few usecs */ + } else if (str3 == H8S_STR3_SWMF) { /* busy with previous request */ + if (prefetch_jiffies == TPC_PREFETCH_NONE) + printk(KERN_WARNING REQ_FMT( + "EC is busy with unrequested transaction", + str3)); + return -EBUSY; /* data will be pending in a few usecs */ + } else if (str3 != 0x00) { /* unexpected status? */ + printk(KERN_WARNING REQ_FMT("unexpected initial STR3", str3)); + return -EIO; + } + + /* Send TWR0MW: */ + outb(args->val[0], TPC_TWR0_PORT); + str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK; + if (str3 != H8S_STR3_MWMF) { /* not accepted? */ + printk(KERN_WARNING REQ_FMT("arg0 rejected", str3)); + return -EIO; + } + + /* Send TWR1 through TWR14: */ + for (i = 1; i < TP_CONTROLLER_ROW_LEN-1; i++) + if ((args->mask>>i)&1) + outb(args->val[i], TPC_TWR0_PORT+i); + + /* Send TWR15 (default to 0x01). This marks end of command. */ + outb((args->mask & 0x8000) ? args->val[0xF] : 0x01, TPC_TWR15_PORT); + + /* Wait until EC starts writing its reply (~60ns on average). + * Releasing locks before this happens may cause an EC hang + * due to firmware bug! + */ + for (i = 0; i < TPC_REQUEST_RETRIES; i++) { + str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK; + if (str3 & H8S_STR3_SWMF) /* EC started replying */ + return 0; + else if (!(str3 & ~(H8S_STR3_IBF3B|H8S_STR3_MWMF))) + /* Normal progress (the EC hasn't seen the request + * yet, or is processing it). Wait it out. */ + ndelay(TPC_REQUEST_NDELAY); + else { /* weird EC status */ + printk(KERN_WARNING + REQ_FMT("bad end STR3", str3)); + return -EIO; + } + } + printk(KERN_WARNING REQ_FMT("EC is mysteriously silent", str3)); + return -EIO; +} + +/** + * thinkpad_ec_read_data - read pre-requested row-data from EC + * @args Input register arguments of pre-requested rows + * @data Output register values + * + * Reads current row data from the controller, assuming it's already + * requested. Follows the H8S spec for register access and status checks. + */ +static int thinkpad_ec_read_data(const struct thinkpad_ec_row *args, + struct thinkpad_ec_row *data) +{ + int i; + u8 str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK; + /* Once we make a request, STR3 assumes the sequence of values listed + * in the following 'if' as it reads the request and writes its data. + * It takes about a few dozen nanosecs total, with very high variance. + */ + if (str3 == (H8S_STR3_IBF3B|H8S_STR3_MWMF) || + str3 == 0x00 || /* the 0x00 is indistinguishable from idle EC! */ + str3 == H8S_STR3_SWMF) + return -EBUSY; /* not ready yet */ + /* Finally, the EC signals output buffer full: */ + if (str3 != (H8S_STR3_OBF3B|H8S_STR3_SWMF)) { + printk(KERN_WARNING + REQ_FMT("bad initial STR3", str3)); + return -EIO; + } + + /* Read first byte (signals start of read transactions): */ + data->val[0] = inb(TPC_TWR0_PORT); + /* Optionally read 14 more bytes: */ + for (i = 1; i < TP_CONTROLLER_ROW_LEN-1; i++) + if ((data->mask >> i)&1) + data->val[i] = inb(TPC_TWR0_PORT+i); + /* Read last byte from 0x161F (signals end of read transaction): */ + data->val[0xF] = inb(TPC_TWR15_PORT); + + /* Readout still pending? */ + str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK; + if (str3 & H8S_STR3_OBF3B) + printk(KERN_WARNING + REQ_FMT("OBF3B=1 after read", str3)); + /* If port 0x161F returns 0x80 too often, the EC may lock up. Warn: */ + if (data->val[0xF] == 0x80) + printk(KERN_WARNING + REQ_FMT("0x161F reports error", data->val[0xF])); + return 0; +} + +/** + * thinkpad_ec_is_row_fetched - is the given row currently prefetched? + * + * To keep things simple we compare only the first and last args; + * this suffices for all known cases. + */ +static int thinkpad_ec_is_row_fetched(const struct thinkpad_ec_row *args) +{ + return (prefetch_jiffies != TPC_PREFETCH_NONE) && + (prefetch_jiffies != TPC_PREFETCH_JUNK) && + (prefetch_arg0 == args->val[0]) && + (prefetch_argF == args->val[0xF]) && + (get_jiffies_64() < prefetch_jiffies + TPC_PREFETCH_TIMEOUT); +} + +/** + * thinkpad_ec_read_row - request and read data from ThinkPad EC + * @args Input register arguments + * @data Output register values + * + * Read a data row from the ThinkPad embedded controller LPC3 interface. + * Does fetching and retrying if needed. The row is specified by an + * array of 16 bytes, some of which may be undefined (but the first is + * mandatory). These bytes are given in @args->val[], where @args->val[i] is + * used iff (@args->mask>>i)&1). The resulting row data is stored in + * @data->val[], but is only guaranteed to be valid for indices corresponding + * to set bit in @data->mask. That is, if @data->mask&(1<val[i] is undefined. + * + * Returns -EBUSY on transient error and -EIO on abnormal condition. + * Caller must hold controller lock. + */ +int thinkpad_ec_read_row(const struct thinkpad_ec_row *args, + struct thinkpad_ec_row *data) +{ + int retries, ret; + + if (thinkpad_ec_is_row_fetched(args)) + goto read_row; /* already requested */ + + /* Request the row */ + for (retries = 0; retries < TPC_READ_RETRIES; ++retries) { + ret = thinkpad_ec_request_row(args); + if (!ret) + goto read_row; + if (ret != -EBUSY) + break; + ndelay(TPC_READ_NDELAY); + } + printk(KERN_ERR REQ_FMT("failed requesting row", ret)); + goto out; + +read_row: + /* Read the row's data */ + for (retries = 0; retries < TPC_READ_RETRIES; ++retries) { + ret = thinkpad_ec_read_data(args, data); + if (!ret) + goto out; + if (ret != -EBUSY) + break; + ndelay(TPC_READ_NDELAY); + } + + printk(KERN_ERR REQ_FMT("failed waiting for data", ret)); + +out: + prefetch_jiffies = TPC_PREFETCH_JUNK; + return ret; +} +EXPORT_SYMBOL_GPL(thinkpad_ec_read_row); + +/** + * thinkpad_ec_try_read_row - try reading prefetched data from ThinkPad EC + * @args Input register arguments + * @data Output register values + * + * Try reading a data row from the ThinkPad embedded controller LPC3 + * interface, if this raw was recently prefetched using + * thinkpad_ec_prefetch_row(). Does not fetch, retry or block. + * The parameters have the same meaning as in thinkpad_ec_read_row(). + * + * Returns -EBUSY is data not ready and -ENODATA if row not prefetched. + * Caller must hold controller lock. + */ +int thinkpad_ec_try_read_row(const struct thinkpad_ec_row *args, + struct thinkpad_ec_row *data) +{ + int ret; + if (!thinkpad_ec_is_row_fetched(args)) { + ret = -ENODATA; + } else { + ret = thinkpad_ec_read_data(args, data); + if (!ret) + prefetch_jiffies = TPC_PREFETCH_NONE; /* eaten up */ + } + return ret; +} +EXPORT_SYMBOL_GPL(thinkpad_ec_try_read_row); + +/** + * thinkpad_ec_prefetch_row - prefetch data from ThinkPad EC + * @args Input register arguments + * + * Prefetch a data row from the ThinkPad embedded controller LCP3 + * interface. A subsequent call to thinkpad_ec_read_row() with the + * same arguments will be faster, and a subsequent call to + * thinkpad_ec_try_read_row() stands a good chance of succeeding if + * done neither too soon nor too late. See + * thinkpad_ec_read_row() for the meaning of @args. + * + * Returns -EBUSY on transient error and -EIO on abnormal condition. + * Caller must hold controller lock. + */ +int thinkpad_ec_prefetch_row(const struct thinkpad_ec_row *args) +{ + int ret; + ret = thinkpad_ec_request_row(args); + if (ret) { + prefetch_jiffies = TPC_PREFETCH_JUNK; + } else { + prefetch_jiffies = get_jiffies_64(); + prefetch_arg0 = args->val[0x0]; + prefetch_argF = args->val[0xF]; + } + return ret; +} +EXPORT_SYMBOL_GPL(thinkpad_ec_prefetch_row); + +/** + * thinkpad_ec_invalidate - invalidate prefetched ThinkPad EC data + * + * Invalidate the data prefetched via thinkpad_ec_prefetch_row() from the + * ThinkPad embedded controller LPC3 interface. + * Must be called before unlocking by any code that accesses the controller + * ports directly. + */ +void thinkpad_ec_invalidate(void) +{ + prefetch_jiffies = TPC_PREFETCH_JUNK; +} +EXPORT_SYMBOL_GPL(thinkpad_ec_invalidate); + + +/*** Checking for EC hardware ***/ + +/** + * thinkpad_ec_test - verify the EC is present and follows protocol + * + * Ensure the EC LPC3 channel really works on this machine by making + * an EC request and seeing if the EC follows the documented H8S protocol. + * The requested row just reads battery status, so it should be harmless to + * access it (on a correct EC). + * This test writes to IO ports, so execute only after checking DMI. + */ +static int __init thinkpad_ec_test(void) +{ + int ret; + const struct thinkpad_ec_row args = /* battery 0 basic status */ + { .mask = 0x8001, .val = {0x01,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0x00} }; + struct thinkpad_ec_row data = { .mask = 0x0000 }; + ret = thinkpad_ec_lock(); + if (ret) + return ret; + ret = thinkpad_ec_read_row(&args, &data); + thinkpad_ec_unlock(); + return ret; +} + +/* Search all DMI device names of a given type for a substring */ +static int __init dmi_find_substring(int type, const char *substr) +{ + const struct dmi_device *dev = NULL; + while ((dev = dmi_find_device(type, NULL, dev))) { + if (strstr(dev->name, substr)) + return 1; + } + return 0; +} + +#define TP_DMI_MATCH(vendor,model) { \ + .ident = vendor " " model, \ + .matches = { \ + DMI_MATCH(DMI_BOARD_VENDOR, vendor), \ + DMI_MATCH(DMI_PRODUCT_VERSION, model) \ + } \ +} + +/* Check DMI for existence of ThinkPad embedded controller */ +static int __init check_dmi_for_ec(void) +{ + /* A few old models that have a good EC but don't report it in DMI */ + struct dmi_system_id tp_whitelist[] = { + TP_DMI_MATCH("IBM", "ThinkPad A30"), + TP_DMI_MATCH("IBM", "ThinkPad T23"), + TP_DMI_MATCH("IBM", "ThinkPad X24"), + TP_DMI_MATCH("LENOVO", "ThinkPad"), + { .ident = NULL } + }; + return dmi_find_substring(DMI_DEV_TYPE_OEM_STRING, + "IBM ThinkPad Embedded Controller") || + dmi_check_system(tp_whitelist); +} + +/*** Init and cleanup ***/ + +static int __init thinkpad_ec_init(void) +{ + if (!check_dmi_for_ec()) { + printk(KERN_WARNING + "thinkpad_ec: no ThinkPad embedded controller!\n"); + return -ENODEV; + } + + if (request_region(TPC_BASE_PORT, TPC_NUM_PORTS, "thinkpad_ec")) { + reserved_io = 1; + } else { + printk(KERN_ERR "thinkpad_ec: cannot claim IO ports %#x-%#x... ", + TPC_BASE_PORT, + TPC_BASE_PORT + TPC_NUM_PORTS - 1); + if (force_io) { + printk("forcing use of unreserved IO ports.\n"); + } else { + printk("consider using force_io=1.\n"); + return -ENXIO; + } + } + prefetch_jiffies = TPC_PREFETCH_JUNK; + if (thinkpad_ec_test()) { + printk(KERN_ERR "thinkpad_ec: initial ec test failed\n"); + if (reserved_io) + release_region(TPC_BASE_PORT, TPC_NUM_PORTS); + return -ENXIO; + } + printk(KERN_INFO "thinkpad_ec: thinkpad_ec " TP_VERSION " loaded.\n"); + return 0; +} + +static void __exit thinkpad_ec_exit(void) +{ + if (reserved_io) + release_region(TPC_BASE_PORT, TPC_NUM_PORTS); + printk(KERN_INFO "thinkpad_ec: unloaded.\n"); +} + +module_init(thinkpad_ec_init); +module_exit(thinkpad_ec_exit); diff --git a/drivers/platform/x86/tp_smapi.c b/drivers/platform/x86/tp_smapi.c new file mode 100644 index 000000000000..209cb6487e24 --- /dev/null +++ b/drivers/platform/x86/tp_smapi.c @@ -0,0 +1,1493 @@ +/* + * tp_smapi.c - ThinkPad SMAPI support + * + * This driver exposes some features of the System Management Application + * Program Interface (SMAPI) BIOS found on ThinkPad laptops. It works on + * models in which the SMAPI BIOS runs in SMM and is invoked by writing + * to the APM control port 0xB2. + * It also exposes battery status information, obtained from the ThinkPad + * embedded controller (via the thinkpad_ec module). + * Ancient ThinkPad models use a different interface, supported by the + * "thinkpad" module from "tpctl". + * + * Many of the battery status values obtained from the EC simply mirror + * values provided by the battery's Smart Battery System (SBS) interface, so + * their meaning is defined by the Smart Battery Data Specification (see + * http://sbs-forum.org/specs/sbdat110.pdf). References to this SBS spec + * are given in the code where relevant. + * + * Copyright (C) 2006 Shem Multinymous . + * SMAPI access code based on the mwave driver by Mike Sullivan. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include /* CMOS defines */ +#include +#include +#include +#include +#include +#include + +#define TP_VERSION "0.42" +#define TP_DESC "ThinkPad SMAPI Support" +#define TP_DIR "smapi" + +MODULE_AUTHOR("Shem Multinymous"); +MODULE_DESCRIPTION(TP_DESC); +MODULE_VERSION(TP_VERSION); +MODULE_LICENSE("GPL"); + +static struct platform_device *pdev; + +static int tp_debug; +module_param_named(debug, tp_debug, int, 0600); +MODULE_PARM_DESC(debug, "Debug level (0=off, 1=on)"); + +/* A few macros for printk()ing: */ +#define TPRINTK(level, fmt, args...) \ + dev_printk(level, &(pdev->dev), "%s: " fmt "\n", __func__, ## args) +#define DPRINTK(fmt, args...) \ + do { if (tp_debug) TPRINTK(KERN_DEBUG, fmt, ## args); } while (0) + +/********************************************************************* + * SMAPI interface + */ + +/* SMAPI functions (register BX when making the SMM call). */ +#define SMAPI_GET_INHIBIT_CHARGE 0x2114 +#define SMAPI_SET_INHIBIT_CHARGE 0x2115 +#define SMAPI_GET_THRESH_START 0x2116 +#define SMAPI_SET_THRESH_START 0x2117 +#define SMAPI_GET_FORCE_DISCHARGE 0x2118 +#define SMAPI_SET_FORCE_DISCHARGE 0x2119 +#define SMAPI_GET_THRESH_STOP 0x211a +#define SMAPI_SET_THRESH_STOP 0x211b + +/* SMAPI error codes (see ThinkPad 770 Technical Reference Manual p.83 at + http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=PFAN-3TUQQD */ +#define SMAPI_RETCODE_EOF 0xff +static struct { u8 rc; char *msg; int ret; } smapi_retcode[] = +{ + {0x00, "OK", 0}, + {0x53, "SMAPI function is not available", -ENXIO}, + {0x81, "Invalid parameter", -EINVAL}, + {0x86, "Function is not supported by SMAPI BIOS", -EOPNOTSUPP}, + {0x90, "System error", -EIO}, + {0x91, "System is invalid", -EIO}, + {0x92, "System is busy, -EBUSY"}, + {0xa0, "Device error (disk read error)", -EIO}, + {0xa1, "Device is busy", -EBUSY}, + {0xa2, "Device is not attached", -ENXIO}, + {0xa3, "Device is disbled", -EIO}, + {0xa4, "Request parameter is out of range", -EINVAL}, + {0xa5, "Request parameter is not accepted", -EINVAL}, + {0xa6, "Transient error", -EBUSY}, /* ? */ + {SMAPI_RETCODE_EOF, "Unknown error code", -EIO} +}; + + +#define SMAPI_MAX_RETRIES 10 +#define SMAPI_PORT2 0x4F /* fixed port, meaning unclear */ +static unsigned short smapi_port; /* APM control port, normally 0xB2 */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) +static DECLARE_MUTEX(smapi_mutex); +#else +static DEFINE_SEMAPHORE(smapi_mutex); +#endif + +/** + * find_smapi_port - read SMAPI port from NVRAM + */ +static int __init find_smapi_port(void) +{ + u16 smapi_id = 0; + unsigned short port = 0; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + smapi_id = CMOS_READ(0x7C); + smapi_id |= (CMOS_READ(0x7D) << 8); + spin_unlock_irqrestore(&rtc_lock, flags); + + if (smapi_id != 0x5349) { + printk(KERN_ERR "SMAPI not supported (ID=0x%x)\n", smapi_id); + return -ENXIO; + } + spin_lock_irqsave(&rtc_lock, flags); + port = CMOS_READ(0x7E); + port |= (CMOS_READ(0x7F) << 8); + spin_unlock_irqrestore(&rtc_lock, flags); + if (port == 0) { + printk(KERN_ERR "unable to read SMAPI port number\n"); + return -ENXIO; + } + return port; +} + +/** + * smapi_request - make a SMAPI call + * @inEBX, @inECX, @inEDI, @inESI: input registers + * @outEBX, @outECX, @outEDX, @outEDI, @outESI: outputs registers + * @msg: textual error message + * Invokes the SMAPI SMBIOS with the given input and outpu args. + * All outputs are optional (can be %NULL). + * Returns 0 when successful, and a negative errno constant + * (see smapi_retcode above) upon failure. + */ +static int smapi_request(u32 inEBX, u32 inECX, + u32 inEDI, u32 inESI, + u32 *outEBX, u32 *outECX, u32 *outEDX, + u32 *outEDI, u32 *outESI, const char **msg) +{ + int ret = 0; + int i; + int retries; + u8 rc; + /* Must use local vars for output regs, due to reg pressure. */ + u32 tmpEAX, tmpEBX, tmpECX, tmpEDX, tmpEDI, tmpESI; + + for (retries = 0; retries < SMAPI_MAX_RETRIES; ++retries) { + DPRINTK("req_in: BX=%x CX=%x DI=%x SI=%x", + inEBX, inECX, inEDI, inESI); + + /* SMAPI's SMBIOS call and thinkpad_ec end up using use + * different interfaces to the same chip, so play it safe. */ + ret = thinkpad_ec_lock(); + if (ret) + return ret; + + __asm__ __volatile__( + "movl $0x00005380,%%eax\n\t" + "movl %6,%%ebx\n\t" + "movl %7,%%ecx\n\t" + "movl %8,%%edi\n\t" + "movl %9,%%esi\n\t" + "xorl %%edx,%%edx\n\t" + "movw %10,%%dx\n\t" + "out %%al,%%dx\n\t" /* trigger SMI to SMBIOS */ + "out %%al,$0x4F\n\t" + "movl %%eax,%0\n\t" + "movl %%ebx,%1\n\t" + "movl %%ecx,%2\n\t" + "movl %%edx,%3\n\t" + "movl %%edi,%4\n\t" + "movl %%esi,%5\n\t" + :"=m"(tmpEAX), + "=m"(tmpEBX), + "=m"(tmpECX), + "=m"(tmpEDX), + "=m"(tmpEDI), + "=m"(tmpESI) + :"m"(inEBX), "m"(inECX), "m"(inEDI), "m"(inESI), + "m"((u16)smapi_port) + :"%eax", "%ebx", "%ecx", "%edx", "%edi", + "%esi"); + + thinkpad_ec_invalidate(); + thinkpad_ec_unlock(); + + /* Don't let the next SMAPI access happen too quickly, + * may case problems. (We're hold smapi_mutex). */ + msleep(50); + + if (outEBX) *outEBX = tmpEBX; + if (outECX) *outECX = tmpECX; + if (outEDX) *outEDX = tmpEDX; + if (outESI) *outESI = tmpESI; + if (outEDI) *outEDI = tmpEDI; + + /* Look up error code */ + rc = (tmpEAX>>8)&0xFF; + for (i = 0; smapi_retcode[i].rc != SMAPI_RETCODE_EOF && + smapi_retcode[i].rc != rc; ++i) {} + ret = smapi_retcode[i].ret; + if (msg) + *msg = smapi_retcode[i].msg; + + DPRINTK("req_out: AX=%x BX=%x CX=%x DX=%x DI=%x SI=%x r=%d", + tmpEAX, tmpEBX, tmpECX, tmpEDX, tmpEDI, tmpESI, ret); + if (ret) + TPRINTK(KERN_NOTICE, "SMAPI error: %s (func=%x)", + smapi_retcode[i].msg, inEBX); + + if (ret != -EBUSY) + return ret; + } + return ret; +} + +/* Convenience wrapper: discard output arguments */ +static int smapi_write(u32 inEBX, u32 inECX, + u32 inEDI, u32 inESI, const char **msg) +{ + return smapi_request(inEBX, inECX, inEDI, inESI, + NULL, NULL, NULL, NULL, NULL, msg); +} + + +/********************************************************************* + * Specific SMAPI services + * All of these functions return 0 upon success, and a negative errno + * constant (see smapi_retcode) on failure. + */ + +enum thresh_type { + THRESH_STOP = 0, /* the code assumes this is 0 for brevity */ + THRESH_START +}; +#define THRESH_NAME(which) ((which == THRESH_START) ? "start" : "stop") + +/** + * __get_real_thresh - read battery charge start/stop threshold from SMAPI + * @bat: battery number (0 or 1) + * @which: THRESH_START or THRESH_STOP + * @thresh: 1..99, 0=default 1..99, 0=default (pass this as-is to SMAPI) + * @outEDI: some additional state that needs to be preserved, meaning unknown + * @outESI: some additional state that needs to be preserved, meaning unknown + */ +static int __get_real_thresh(int bat, enum thresh_type which, int *thresh, + u32 *outEDI, u32 *outESI) +{ + u32 ebx = (which == THRESH_START) ? SMAPI_GET_THRESH_START + : SMAPI_GET_THRESH_STOP; + u32 ecx = (bat+1)<<8; + const char *msg; + int ret = smapi_request(ebx, ecx, 0, 0, NULL, + &ecx, NULL, outEDI, outESI, &msg); + if (ret) { + TPRINTK(KERN_NOTICE, "cannot get %s_thresh of bat=%d: %s", + THRESH_NAME(which), bat, msg); + return ret; + } + if (!(ecx&0x00000100)) { + TPRINTK(KERN_NOTICE, "cannot get %s_thresh of bat=%d: ecx=0%x", + THRESH_NAME(which), bat, ecx); + return -EIO; + } + if (thresh) + *thresh = ecx&0xFF; + return 0; +} + +/** + * get_real_thresh - read battery charge start/stop threshold from SMAPI + * @bat: battery number (0 or 1) + * @which: THRESH_START or THRESH_STOP + * @thresh: 1..99, 0=default (passes as-is to SMAPI) + */ +static int get_real_thresh(int bat, enum thresh_type which, int *thresh) +{ + return __get_real_thresh(bat, which, thresh, NULL, NULL); +} + +/** + * set_real_thresh - write battery start/top charge threshold to SMAPI + * @bat: battery number (0 or 1) + * @which: THRESH_START or THRESH_STOP + * @thresh: 1..99, 0=default (passes as-is to SMAPI) + */ +static int set_real_thresh(int bat, enum thresh_type which, int thresh) +{ + u32 ebx = (which == THRESH_START) ? SMAPI_SET_THRESH_START + : SMAPI_SET_THRESH_STOP; + u32 ecx = ((bat+1)<<8) + thresh; + u32 getDI, getSI; + const char *msg; + int ret; + + /* verify read before writing */ + ret = __get_real_thresh(bat, which, NULL, &getDI, &getSI); + if (ret) + return ret; + + ret = smapi_write(ebx, ecx, getDI, getSI, &msg); + if (ret) + TPRINTK(KERN_NOTICE, "set %s to %d for bat=%d failed: %s", + THRESH_NAME(which), thresh, bat, msg); + else + TPRINTK(KERN_INFO, "set %s to %d for bat=%d", + THRESH_NAME(which), thresh, bat); + return ret; +} + +/** + * __get_inhibit_charge_minutes - get inhibit charge period from SMAPI + * @bat: battery number (0 or 1) + * @minutes: period in minutes (1..65535 minutes, 0=disabled) + * @outECX: some additional state that needs to be preserved, meaning unknown + * Note that @minutes is the originally set value, it does not count down. + */ +static int __get_inhibit_charge_minutes(int bat, int *minutes, u32 *outECX) +{ + u32 ecx = (bat+1)<<8; + u32 esi; + const char *msg; + int ret = smapi_request(SMAPI_GET_INHIBIT_CHARGE, ecx, 0, 0, + NULL, &ecx, NULL, NULL, &esi, &msg); + if (ret) { + TPRINTK(KERN_NOTICE, "failed for bat=%d: %s", bat, msg); + return ret; + } + if (!(ecx&0x0100)) { + TPRINTK(KERN_NOTICE, "bad ecx=0x%x for bat=%d", ecx, bat); + return -EIO; + } + if (minutes) + *minutes = (ecx&0x0001)?esi:0; + if (outECX) + *outECX = ecx; + return 0; +} + +/** + * get_inhibit_charge_minutes - get inhibit charge period from SMAPI + * @bat: battery number (0 or 1) + * @minutes: period in minutes (1..65535 minutes, 0=disabled) + * Note that @minutes is the originally set value, it does not count down. + */ +static int get_inhibit_charge_minutes(int bat, int *minutes) +{ + return __get_inhibit_charge_minutes(bat, minutes, NULL); +} + +/** + * set_inhibit_charge_minutes - write inhibit charge period to SMAPI + * @bat: battery number (0 or 1) + * @minutes: period in minutes (1..65535 minutes, 0=disabled) + */ +static int set_inhibit_charge_minutes(int bat, int minutes) +{ + u32 ecx; + const char *msg; + int ret; + + /* verify read before writing */ + ret = __get_inhibit_charge_minutes(bat, NULL, &ecx); + if (ret) + return ret; + + ecx = ((bat+1)<<8) | (ecx&0x00FE) | (minutes > 0 ? 0x0001 : 0x0000); + if (minutes > 0xFFFF) + minutes = 0xFFFF; + ret = smapi_write(SMAPI_SET_INHIBIT_CHARGE, ecx, 0, minutes, &msg); + if (ret) + TPRINTK(KERN_NOTICE, + "set to %d failed for bat=%d: %s", minutes, bat, msg); + else + TPRINTK(KERN_INFO, "set to %d for bat=%d\n", minutes, bat); + return ret; +} + + +/** + * get_force_discharge - get status of forced discharging from SMAPI + * @bat: battery number (0 or 1) + * @enabled: 1 if forced discharged is enabled, 0 if not + */ +static int get_force_discharge(int bat, int *enabled) +{ + u32 ecx = (bat+1)<<8; + const char *msg; + int ret = smapi_request(SMAPI_GET_FORCE_DISCHARGE, ecx, 0, 0, + NULL, &ecx, NULL, NULL, NULL, &msg); + if (ret) { + TPRINTK(KERN_NOTICE, "failed for bat=%d: %s", bat, msg); + return ret; + } + *enabled = (!(ecx&0x00000100) && (ecx&0x00000001))?1:0; + return 0; +} + +/** + * set_force_discharge - write status of forced discharging to SMAPI + * @bat: battery number (0 or 1) + * @enabled: 1 if forced discharged is enabled, 0 if not + */ +static int set_force_discharge(int bat, int enabled) +{ + u32 ecx = (bat+1)<<8; + const char *msg; + int ret = smapi_request(SMAPI_GET_FORCE_DISCHARGE, ecx, 0, 0, + NULL, &ecx, NULL, NULL, NULL, &msg); + if (ret) { + TPRINTK(KERN_NOTICE, "get failed for bat=%d: %s", bat, msg); + return ret; + } + if (ecx&0x00000100) { + TPRINTK(KERN_NOTICE, "cannot force discharge bat=%d", bat); + return -EIO; + } + + ecx = ((bat+1)<<8) | (ecx&0x000000FA) | (enabled?0x00000001:0); + ret = smapi_write(SMAPI_SET_FORCE_DISCHARGE, ecx, 0, 0, &msg); + if (ret) + TPRINTK(KERN_NOTICE, "set to %d failed for bat=%d: %s", + enabled, bat, msg); + else + TPRINTK(KERN_INFO, "set to %d for bat=%d", enabled, bat); + return ret; +} + + +/********************************************************************* + * Wrappers to threshold-related SMAPI functions, which handle default + * thresholds and related quirks. + */ + +/* Minimum, default and minimum difference for battery charging thresholds: */ +#define MIN_THRESH_DELTA 4 /* Min delta between start and stop thresh */ +#define MIN_THRESH_START 2 +#define MAX_THRESH_START (100-MIN_THRESH_DELTA) +#define MIN_THRESH_STOP (MIN_THRESH_START + MIN_THRESH_DELTA) +#define MAX_THRESH_STOP 100 +#define DEFAULT_THRESH_START MAX_THRESH_START +#define DEFAULT_THRESH_STOP MAX_THRESH_STOP + +/* The GUI of IBM's Battery Maximizer seems to show a start threshold that + * is 1 more than the value we set/get via SMAPI. Since the threshold is + * maintained across reboot, this can be confusing. So we kludge our + * interface for interoperability: */ +#define BATMAX_FIX 1 + +/* Get charge start/stop threshold (1..100), + * substituting default values if needed and applying BATMAT_FIX. */ +static int get_thresh(int bat, enum thresh_type which, int *thresh) +{ + int ret = get_real_thresh(bat, which, thresh); + if (ret) + return ret; + if (*thresh == 0) + *thresh = (which == THRESH_START) ? DEFAULT_THRESH_START + : DEFAULT_THRESH_STOP; + else if (which == THRESH_START) + *thresh += BATMAX_FIX; + return 0; +} + + +/* Set charge start/stop threshold (1..100), + * substituting default values if needed and applying BATMAT_FIX. */ +static int set_thresh(int bat, enum thresh_type which, int thresh) +{ + if (which == THRESH_STOP && thresh == DEFAULT_THRESH_STOP) + thresh = 0; /* 100 is out of range, but default means 100 */ + if (which == THRESH_START) + thresh -= BATMAX_FIX; + return set_real_thresh(bat, which, thresh); +} + +/********************************************************************* + * ThinkPad embedded controller readout and basic functions + */ + +/** + * read_tp_ec_row - read data row from the ThinkPad embedded controller + * @arg0: EC command code + * @bat: battery number, 0 or 1 + * @j: the byte value to be used for "junk" (unused) input/outputs + * @dataval: result vector + */ +static int read_tp_ec_row(u8 arg0, int bat, u8 j, u8 *dataval) +{ + int ret; + const struct thinkpad_ec_row args = { .mask = 0xFFFF, + .val = {arg0, j,j,j,j,j,j,j,j,j,j,j,j,j,j, (u8)bat} }; + struct thinkpad_ec_row data = { .mask = 0xFFFF }; + + ret = thinkpad_ec_lock(); + if (ret) + return ret; + ret = thinkpad_ec_read_row(&args, &data); + thinkpad_ec_unlock(); + memcpy(dataval, &data.val, TP_CONTROLLER_ROW_LEN); + return ret; +} + +/** + * power_device_present - check for presence of battery or AC power + * @bat: 0 for battery 0, 1 for battery 1, otherwise AC power + * Returns 1 if present, 0 if not present, negative if error. + */ +static int power_device_present(int bat) +{ + u8 row[TP_CONTROLLER_ROW_LEN]; + u8 test; + int ret = read_tp_ec_row(1, bat, 0, row); + if (ret) + return ret; + switch (bat) { + case 0: test = 0x40; break; /* battery 0 */ + case 1: test = 0x20; break; /* battery 1 */ + default: test = 0x80; /* AC power */ + } + return (row[0] & test) ? 1 : 0; +} + +/** + * bat_has_status - check if battery can report detailed status + * @bat: 0 for battery 0, 1 for battery 1 + * Returns 1 if yes, 0 if no, negative if error. + */ +static int bat_has_status(int bat) +{ + u8 row[TP_CONTROLLER_ROW_LEN]; + int ret = read_tp_ec_row(1, bat, 0, row); + if (ret) + return ret; + if ((row[0] & (bat?0x20:0x40)) == 0) /* no battery */ + return 0; + if ((row[1] & (0x60)) == 0) /* no status */ + return 0; + return 1; +} + +/** + * get_tp_ec_bat_16 - read a 16-bit value from EC battery status data + * @arg0: first argument to EC + * @off: offset in row returned from EC + * @bat: battery (0 or 1) + * @val: the 16-bit value obtained + * Returns nonzero on error. + */ +static int get_tp_ec_bat_16(u8 arg0, int offset, int bat, u16 *val) +{ + u8 row[TP_CONTROLLER_ROW_LEN]; + int ret; + if (bat_has_status(bat) != 1) + return -ENXIO; + ret = read_tp_ec_row(arg0, bat, 0, row); + if (ret) + return ret; + *val = *(u16 *)(row+offset); + return 0; +} + +/********************************************************************* + * sysfs attributes for batteries - + * definitions and helper functions + */ + +/* A custom device attribute struct which holds a battery number */ +struct bat_device_attribute { + struct device_attribute dev_attr; + int bat; +}; + +/** + * attr_get_bat - get the battery to which the attribute belongs + */ +static int attr_get_bat(struct device_attribute *attr) +{ + return container_of(attr, struct bat_device_attribute, dev_attr)->bat; +} + +/** + * show_tp_ec_bat_u16 - show an unsigned 16-bit battery attribute + * @arg0: specified 1st argument of EC raw to read + * @offset: byte offset in EC raw data + * @mul: correction factor to multiply by + * @na_msg: string to output is value not available (0xFFFFFFFF) + * @attr: battery attribute + * @buf: output buffer + * The 16-bit value is read from the EC, treated as unsigned, + * transformed as x->mul*x, and printed to the buffer. + * If the value is 0xFFFFFFFF and na_msg!=%NULL, na_msg is printed instead. + */ +static ssize_t show_tp_ec_bat_u16(u8 arg0, int offset, int mul, + const char *na_msg, + struct device_attribute *attr, char *buf) +{ + u16 val; + int ret = get_tp_ec_bat_16(arg0, offset, attr_get_bat(attr), &val); + if (ret) + return ret; + if (na_msg && val == 0xFFFF) + return sprintf(buf, "%s\n", na_msg); + else + return sprintf(buf, "%u\n", mul*(unsigned int)val); +} + +/** + * show_tp_ec_bat_s16 - show an signed 16-bit battery attribute + * @arg0: specified 1st argument of EC raw to read + * @offset: byte offset in EC raw data + * @mul: correction factor to multiply by + * @add: correction term to add after multiplication + * @attr: battery attribute + * @buf: output buffer + * The 16-bit value is read from the EC, treated as signed, + * transformed as x->mul*x+add, and printed to the buffer. + */ +static ssize_t show_tp_ec_bat_s16(u8 arg0, int offset, int mul, int add, + struct device_attribute *attr, char *buf) +{ + u16 val; + int ret = get_tp_ec_bat_16(arg0, offset, attr_get_bat(attr), &val); + if (ret) + return ret; + return sprintf(buf, "%d\n", mul*(s16)val+add); +} + +/** + * show_tp_ec_bat_str - show a string from EC battery status data + * @arg0: specified 1st argument of EC raw to read + * @offset: byte offset in EC raw data + * @maxlen: maximum string length + * @attr: battery attribute + * @buf: output buffer + */ +static ssize_t show_tp_ec_bat_str(u8 arg0, int offset, int maxlen, + struct device_attribute *attr, char *buf) +{ + int bat = attr_get_bat(attr); + u8 row[TP_CONTROLLER_ROW_LEN]; + int ret; + if (bat_has_status(bat) != 1) + return -ENXIO; + ret = read_tp_ec_row(arg0, bat, 0, row); + if (ret) + return ret; + strncpy(buf, (char *)row+offset, maxlen); + buf[maxlen] = 0; + strcat(buf, "\n"); + return strlen(buf); +} + +/** + * show_tp_ec_bat_power - show a power readout from EC battery status data + * @arg0: specified 1st argument of EC raw to read + * @offV: byte offset of voltage in EC raw data + * @offI: byte offset of current in EC raw data + * @attr: battery attribute + * @buf: output buffer + * Computes the power as current*voltage from the two given readout offsets. + */ +static ssize_t show_tp_ec_bat_power(u8 arg0, int offV, int offI, + struct device_attribute *attr, char *buf) +{ + u8 row[TP_CONTROLLER_ROW_LEN]; + int milliamp, millivolt, ret; + int bat = attr_get_bat(attr); + if (bat_has_status(bat) != 1) + return -ENXIO; + ret = read_tp_ec_row(1, bat, 0, row); + if (ret) + return ret; + millivolt = *(u16 *)(row+offV); + milliamp = *(s16 *)(row+offI); + return sprintf(buf, "%d\n", milliamp*millivolt/1000); /* units: mW */ +} + +/** + * show_tp_ec_bat_date - decode and show a date from EC battery status data + * @arg0: specified 1st argument of EC raw to read + * @offset: byte offset in EC raw data + * @attr: battery attribute + * @buf: output buffer + */ +static ssize_t show_tp_ec_bat_date(u8 arg0, int offset, + struct device_attribute *attr, char *buf) +{ + u8 row[TP_CONTROLLER_ROW_LEN]; + u16 v; + int ret; + int day, month, year; + int bat = attr_get_bat(attr); + if (bat_has_status(bat) != 1) + return -ENXIO; + ret = read_tp_ec_row(arg0, bat, 0, row); + if (ret) + return ret; + + /* Decode bit-packed: v = day | (month<<5) | ((year-1980)<<9) */ + v = *(u16 *)(row+offset); + day = v & 0x1F; + month = (v >> 5) & 0xF; + year = (v >> 9) + 1980; + + return sprintf(buf, "%04d-%02d-%02d\n", year, month, day); +} + + +/********************************************************************* + * sysfs attribute I/O for batteries - + * the actual attribute show/store functions + */ + +static ssize_t show_battery_start_charge_thresh(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int thresh; + int bat = attr_get_bat(attr); + int ret = get_thresh(bat, THRESH_START, &thresh); + if (ret) + return ret; + return sprintf(buf, "%d\n", thresh); /* units: percent */ +} + +static ssize_t show_battery_stop_charge_thresh(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int thresh; + int bat = attr_get_bat(attr); + int ret = get_thresh(bat, THRESH_STOP, &thresh); + if (ret) + return ret; + return sprintf(buf, "%d\n", thresh); /* units: percent */ +} + +/** + * store_battery_start_charge_thresh - store battery_start_charge_thresh attr + * Since this is a kernel<->user interface, we ensure a valid state for + * the hardware. We do this by clamping the requested threshold to the + * valid range and, if necessary, moving the other threshold so that + * it's MIN_THRESH_DELTA away from this one. + */ +static ssize_t store_battery_start_charge_thresh(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int thresh, other_thresh, ret; + int bat = attr_get_bat(attr); + + if (sscanf(buf, "%d", &thresh) != 1 || thresh < 1 || thresh > 100) + return -EINVAL; + + if (thresh < MIN_THRESH_START) /* clamp up to MIN_THRESH_START */ + thresh = MIN_THRESH_START; + if (thresh > MAX_THRESH_START) /* clamp down to MAX_THRESH_START */ + thresh = MAX_THRESH_START; + + down(&smapi_mutex); + ret = get_thresh(bat, THRESH_STOP, &other_thresh); + if (ret != -EOPNOTSUPP && ret != -ENXIO) { + if (ret) /* other threshold is set? */ + goto out; + ret = get_real_thresh(bat, THRESH_START, NULL); + if (ret) /* this threshold is set? */ + goto out; + if (other_thresh < thresh+MIN_THRESH_DELTA) { + /* move other thresh to keep it above this one */ + ret = set_thresh(bat, THRESH_STOP, + thresh+MIN_THRESH_DELTA); + if (ret) + goto out; + } + } + ret = set_thresh(bat, THRESH_START, thresh); +out: + up(&smapi_mutex); + return count; + +} + +/** + * store_battery_stop_charge_thresh - store battery_stop_charge_thresh attr + * Since this is a kernel<->user interface, we ensure a valid state for + * the hardware. We do this by clamping the requested threshold to the + * valid range and, if necessary, moving the other threshold so that + * it's MIN_THRESH_DELTA away from this one. + */ +static ssize_t store_battery_stop_charge_thresh(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int thresh, other_thresh, ret; + int bat = attr_get_bat(attr); + + if (sscanf(buf, "%d", &thresh) != 1 || thresh < 1 || thresh > 100) + return -EINVAL; + + if (thresh < MIN_THRESH_STOP) /* clamp up to MIN_THRESH_STOP */ + thresh = MIN_THRESH_STOP; + + down(&smapi_mutex); + ret = get_thresh(bat, THRESH_START, &other_thresh); + if (ret != -EOPNOTSUPP && ret != -ENXIO) { /* other threshold exists? */ + if (ret) + goto out; + /* this threshold exists? */ + ret = get_real_thresh(bat, THRESH_STOP, NULL); + if (ret) + goto out; + if (other_thresh >= thresh-MIN_THRESH_DELTA) { + /* move other thresh to be below this one */ + ret = set_thresh(bat, THRESH_START, + thresh-MIN_THRESH_DELTA); + if (ret) + goto out; + } + } + ret = set_thresh(bat, THRESH_STOP, thresh); +out: + up(&smapi_mutex); + return count; +} + +static ssize_t show_battery_inhibit_charge_minutes(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int minutes; + int bat = attr_get_bat(attr); + int ret = get_inhibit_charge_minutes(bat, &minutes); + if (ret) + return ret; + return sprintf(buf, "%d\n", minutes); /* units: minutes */ +} + +static ssize_t store_battery_inhibit_charge_minutes(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int minutes; + int bat = attr_get_bat(attr); + if (sscanf(buf, "%d", &minutes) != 1 || minutes < 0) { + TPRINTK(KERN_ERR, "inhibit_charge_minutes: " + "must be a non-negative integer"); + return -EINVAL; + } + ret = set_inhibit_charge_minutes(bat, minutes); + if (ret) + return ret; + return count; +} + +static ssize_t show_battery_force_discharge(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int enabled; + int bat = attr_get_bat(attr); + int ret = get_force_discharge(bat, &enabled); + if (ret) + return ret; + return sprintf(buf, "%d\n", enabled); /* type: boolean */ +} + +static ssize_t store_battery_force_discharge(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int ret; + int enabled; + int bat = attr_get_bat(attr); + if (sscanf(buf, "%d", &enabled) != 1 || enabled < 0 || enabled > 1) + return -EINVAL; + ret = set_force_discharge(bat, enabled); + if (ret) + return ret; + return count; +} + +static ssize_t show_battery_installed( + struct device *dev, struct device_attribute *attr, char *buf) +{ + int bat = attr_get_bat(attr); + int ret = power_device_present(bat); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", ret); /* type: boolean */ +} + +static ssize_t show_battery_state( + struct device *dev, struct device_attribute *attr, char *buf) +{ + u8 row[TP_CONTROLLER_ROW_LEN]; + const char *txt; + int ret; + int bat = attr_get_bat(attr); + if (bat_has_status(bat) != 1) + return sprintf(buf, "none\n"); + ret = read_tp_ec_row(1, bat, 0, row); + if (ret) + return ret; + switch (row[1] & 0xf0) { + case 0xc0: txt = "idle"; break; + case 0xd0: txt = "discharging"; break; + case 0xe0: txt = "charging"; break; + default: return sprintf(buf, "unknown (0x%x)\n", row[1]); + } + return sprintf(buf, "%s\n", txt); /* type: string from fixed set */ +} + +static ssize_t show_battery_manufacturer( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* type: string. SBS spec v1.1 p34: ManufacturerName() */ + return show_tp_ec_bat_str(4, 2, TP_CONTROLLER_ROW_LEN-2, attr, buf); +} + +static ssize_t show_battery_model( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* type: string. SBS spec v1.1 p34: DeviceName() */ + return show_tp_ec_bat_str(5, 2, TP_CONTROLLER_ROW_LEN-2, attr, buf); +} + +static ssize_t show_battery_barcoding( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* type: string */ + return show_tp_ec_bat_str(7, 2, TP_CONTROLLER_ROW_LEN-2, attr, buf); +} + +static ssize_t show_battery_chemistry( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* type: string. SBS spec v1.1 p34-35: DeviceChemistry() */ + return show_tp_ec_bat_str(6, 2, 5, attr, buf); +} + +static ssize_t show_battery_voltage( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mV. SBS spec v1.1 p24: Voltage() */ + return show_tp_ec_bat_u16(1, 6, 1, NULL, attr, buf); +} + +static ssize_t show_battery_design_voltage( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mV. SBS spec v1.1 p32: DesignVoltage() */ + return show_tp_ec_bat_u16(3, 4, 1, NULL, attr, buf); +} + +static ssize_t show_battery_charging_max_voltage( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mV. SBS spec v1.1 p37,39: ChargingVoltage() */ + return show_tp_ec_bat_u16(9, 8, 1, NULL, attr, buf); +} + +static ssize_t show_battery_group0_voltage( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mV */ + return show_tp_ec_bat_u16(0xA, 12, 1, NULL, attr, buf); +} + +static ssize_t show_battery_group1_voltage( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mV */ + return show_tp_ec_bat_u16(0xA, 10, 1, NULL, attr, buf); +} + +static ssize_t show_battery_group2_voltage( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mV */ + return show_tp_ec_bat_u16(0xA, 8, 1, NULL, attr, buf); +} + +static ssize_t show_battery_group3_voltage( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mV */ + return show_tp_ec_bat_u16(0xA, 6, 1, NULL, attr, buf); +} + +static ssize_t show_battery_current_now( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mA. SBS spec v1.1 p24: Current() */ + return show_tp_ec_bat_s16(1, 8, 1, 0, attr, buf); +} + +static ssize_t show_battery_current_avg( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mA. SBS spec v1.1 p24: AverageCurrent() */ + return show_tp_ec_bat_s16(1, 10, 1, 0, attr, buf); +} + +static ssize_t show_battery_charging_max_current( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mA. SBS spec v1.1 p36,38: ChargingCurrent() */ + return show_tp_ec_bat_s16(9, 6, 1, 0, attr, buf); +} + +static ssize_t show_battery_power_now( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mW. SBS spec v1.1: Voltage()*Current() */ + return show_tp_ec_bat_power(1, 6, 8, attr, buf); +} + +static ssize_t show_battery_power_avg( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mW. SBS spec v1.1: Voltage()*AverageCurrent() */ + return show_tp_ec_bat_power(1, 6, 10, attr, buf); +} + +static ssize_t show_battery_remaining_percent( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: percent. SBS spec v1.1 p25: RelativeStateOfCharge() */ + return show_tp_ec_bat_u16(1, 12, 1, NULL, attr, buf); +} + +static ssize_t show_battery_remaining_percent_error( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: percent. SBS spec v1.1 p25: MaxError() */ + return show_tp_ec_bat_u16(9, 4, 1, NULL, attr, buf); +} + +static ssize_t show_battery_remaining_charging_time( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: minutes. SBS spec v1.1 p27: AverageTimeToFull() */ + return show_tp_ec_bat_u16(2, 8, 1, "not_charging", attr, buf); +} + +static ssize_t show_battery_remaining_running_time( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: minutes. SBS spec v1.1 p27: RunTimeToEmpty() */ + return show_tp_ec_bat_u16(2, 6, 1, "not_discharging", attr, buf); +} + +static ssize_t show_battery_remaining_running_time_now( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: minutes. SBS spec v1.1 p27: RunTimeToEmpty() */ + return show_tp_ec_bat_u16(2, 4, 1, "not_discharging", attr, buf); +} + +static ssize_t show_battery_remaining_capacity( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mWh. SBS spec v1.1 p26. */ + return show_tp_ec_bat_u16(1, 14, 10, "", attr, buf); +} + +static ssize_t show_battery_last_full_capacity( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mWh. SBS spec v1.1 p26: FullChargeCapacity() */ + return show_tp_ec_bat_u16(2, 2, 10, "", attr, buf); +} + +static ssize_t show_battery_design_capacity( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: mWh. SBS spec v1.1 p32: DesignCapacity() */ + return show_tp_ec_bat_u16(3, 2, 10, "", attr, buf); +} + +static ssize_t show_battery_cycle_count( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: ordinal. SBS spec v1.1 p32: CycleCount() */ + return show_tp_ec_bat_u16(2, 12, 1, "", attr, buf); +} + +static ssize_t show_battery_temperature( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* units: millicelsius. SBS spec v1.1: Temperature()*10 */ + return show_tp_ec_bat_s16(1, 4, 100, -273100, attr, buf); +} + +static ssize_t show_battery_serial( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* type: int. SBS spec v1.1 p34: SerialNumber() */ + return show_tp_ec_bat_u16(3, 10, 1, "", attr, buf); +} + +static ssize_t show_battery_manufacture_date( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* type: YYYY-MM-DD. SBS spec v1.1 p34: ManufactureDate() */ + return show_tp_ec_bat_date(3, 8, attr, buf); +} + +static ssize_t show_battery_first_use_date( + struct device *dev, struct device_attribute *attr, char *buf) +{ + /* type: YYYY-MM-DD */ + return show_tp_ec_bat_date(8, 2, attr, buf); +} + +/** + * show_battery_dump - show the battery's dump attribute + * The dump attribute gives a hex dump of all EC readouts related to a + * battery. Some of the enumerated values don't really exist (i.e., the + * EC function just leaves them untouched); we use a kludge to detect and + * denote these. + */ +#define MIN_DUMP_ARG0 0x00 +#define MAX_DUMP_ARG0 0x0a /* 0x0b is useful too but hangs old EC firmware */ +static ssize_t show_battery_dump( + struct device *dev, struct device_attribute *attr, char *buf) +{ + int i; + char *p = buf; + int bat = attr_get_bat(attr); + u8 arg0; /* first argument to EC */ + u8 rowa[TP_CONTROLLER_ROW_LEN], + rowb[TP_CONTROLLER_ROW_LEN]; + const u8 junka = 0xAA, + junkb = 0x55; /* junk values for testing changes */ + int ret; + + for (arg0 = MIN_DUMP_ARG0; arg0 <= MAX_DUMP_ARG0; ++arg0) { + if ((p-buf) > PAGE_SIZE-TP_CONTROLLER_ROW_LEN*5) + return -ENOMEM; /* don't overflow sysfs buf */ + /* Read raw twice with different junk values, + * to detect unused output bytes which are left unchaged: */ + ret = read_tp_ec_row(arg0, bat, junka, rowa); + if (ret) + return ret; + ret = read_tp_ec_row(arg0, bat, junkb, rowb); + if (ret) + return ret; + for (i = 0; i < TP_CONTROLLER_ROW_LEN; i++) { + if (rowa[i] == junka && rowb[i] == junkb) + p += sprintf(p, "-- "); /* unused by EC */ + else + p += sprintf(p, "%02x ", rowa[i]); + } + p += sprintf(p, "\n"); + } + return p-buf; +} + + +/********************************************************************* + * sysfs attribute I/O, other than batteries + */ + +static ssize_t show_ac_connected( + struct device *dev, struct device_attribute *attr, char *buf) +{ + int ret = power_device_present(0xFF); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", ret); /* type: boolean */ +} + +/********************************************************************* + * The the "smapi_request" sysfs attribute executes a raw SMAPI call. + * You write to make a request and read to get the result. The state + * is saved globally rather than per fd (sysfs limitation), so + * simultaenous requests may get each other's results! So this is for + * development and debugging only. + */ +#define MAX_SMAPI_ATTR_ANSWER_LEN 128 +static char smapi_attr_answer[MAX_SMAPI_ATTR_ANSWER_LEN] = ""; + +static ssize_t show_smapi_request(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret = snprintf(buf, PAGE_SIZE, "%s", smapi_attr_answer); + smapi_attr_answer[0] = '\0'; + return ret; +} + +static ssize_t store_smapi_request(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned int inEBX, inECX, inEDI, inESI; + u32 outEBX, outECX, outEDX, outEDI, outESI; + const char *msg; + int ret; + if (sscanf(buf, "%x %x %x %x", &inEBX, &inECX, &inEDI, &inESI) != 4) { + smapi_attr_answer[0] = '\0'; + return -EINVAL; + } + ret = smapi_request( + inEBX, inECX, inEDI, inESI, + &outEBX, &outECX, &outEDX, &outEDI, &outESI, &msg); + snprintf(smapi_attr_answer, MAX_SMAPI_ATTR_ANSWER_LEN, + "%x %x %x %x %x %d '%s'\n", + (unsigned int)outEBX, (unsigned int)outECX, + (unsigned int)outEDX, (unsigned int)outEDI, + (unsigned int)outESI, ret, msg); + if (ret) + return ret; + else + return count; +} + +/********************************************************************* + * Power management: the embedded controller forgets the battery + * thresholds when the system is suspended to disk and unplugged from + * AC and battery, so we restore it upon resume. + */ + +static int saved_threshs[4] = {-1, -1, -1, -1}; /* -1 = don't know */ + +static int tp_suspend(struct platform_device *dev, pm_message_t state) +{ + int restore = (state.event == PM_EVENT_HIBERNATE || + state.event == PM_EVENT_FREEZE); + if (!restore || get_real_thresh(0, THRESH_STOP , &saved_threshs[0])) + saved_threshs[0] = -1; + if (!restore || get_real_thresh(0, THRESH_START, &saved_threshs[1])) + saved_threshs[1] = -1; + if (!restore || get_real_thresh(1, THRESH_STOP , &saved_threshs[2])) + saved_threshs[2] = -1; + if (!restore || get_real_thresh(1, THRESH_START, &saved_threshs[3])) + saved_threshs[3] = -1; + DPRINTK("suspend saved: %d %d %d %d", saved_threshs[0], + saved_threshs[1], saved_threshs[2], saved_threshs[3]); + return 0; +} + +static int tp_resume(struct platform_device *dev) +{ + DPRINTK("resume restoring: %d %d %d %d", saved_threshs[0], + saved_threshs[1], saved_threshs[2], saved_threshs[3]); + if (saved_threshs[0] >= 0) + set_real_thresh(0, THRESH_STOP , saved_threshs[0]); + if (saved_threshs[1] >= 0) + set_real_thresh(0, THRESH_START, saved_threshs[1]); + if (saved_threshs[2] >= 0) + set_real_thresh(1, THRESH_STOP , saved_threshs[2]); + if (saved_threshs[3] >= 0) + set_real_thresh(1, THRESH_START, saved_threshs[3]); + return 0; +} + + +/********************************************************************* + * Driver model + */ + +static struct platform_driver tp_driver = { + .suspend = tp_suspend, + .resume = tp_resume, + .driver = { + .name = "smapi", + .owner = THIS_MODULE + }, +}; + + +/********************************************************************* + * Sysfs device model + */ + +/* Attributes in /sys/devices/platform/smapi/ */ + +static DEVICE_ATTR(ac_connected, 0444, show_ac_connected, NULL); +static DEVICE_ATTR(smapi_request, 0600, show_smapi_request, + store_smapi_request); + +static struct attribute *tp_root_attributes[] = { + &dev_attr_ac_connected.attr, + &dev_attr_smapi_request.attr, + NULL +}; +static struct attribute_group tp_root_attribute_group = { + .attrs = tp_root_attributes +}; + +/* Attributes under /sys/devices/platform/smapi/BAT{0,1}/ : + * Every attribute needs to be defined (i.e., statically allocated) for + * each battery, and then referenced in the attribute list of each battery. + * We use preprocessor voodoo to avoid duplicating the list of attributes 4 + * times. The preprocessor output is just normal sysfs attributes code. + */ + +/** + * FOREACH_BAT_ATTR - invoke the given macros on all our battery attributes + * @_BAT: battery number (0 or 1) + * @_ATTR_RW: macro to invoke for each read/write attribute + * @_ATTR_R: macro to invoke for each read-only attribute + */ +#define FOREACH_BAT_ATTR(_BAT, _ATTR_RW, _ATTR_R) \ + _ATTR_RW(_BAT, start_charge_thresh) \ + _ATTR_RW(_BAT, stop_charge_thresh) \ + _ATTR_RW(_BAT, inhibit_charge_minutes) \ + _ATTR_RW(_BAT, force_discharge) \ + _ATTR_R(_BAT, installed) \ + _ATTR_R(_BAT, state) \ + _ATTR_R(_BAT, manufacturer) \ + _ATTR_R(_BAT, model) \ + _ATTR_R(_BAT, barcoding) \ + _ATTR_R(_BAT, chemistry) \ + _ATTR_R(_BAT, voltage) \ + _ATTR_R(_BAT, group0_voltage) \ + _ATTR_R(_BAT, group1_voltage) \ + _ATTR_R(_BAT, group2_voltage) \ + _ATTR_R(_BAT, group3_voltage) \ + _ATTR_R(_BAT, current_now) \ + _ATTR_R(_BAT, current_avg) \ + _ATTR_R(_BAT, charging_max_current) \ + _ATTR_R(_BAT, power_now) \ + _ATTR_R(_BAT, power_avg) \ + _ATTR_R(_BAT, remaining_percent) \ + _ATTR_R(_BAT, remaining_percent_error) \ + _ATTR_R(_BAT, remaining_charging_time) \ + _ATTR_R(_BAT, remaining_running_time) \ + _ATTR_R(_BAT, remaining_running_time_now) \ + _ATTR_R(_BAT, remaining_capacity) \ + _ATTR_R(_BAT, last_full_capacity) \ + _ATTR_R(_BAT, design_voltage) \ + _ATTR_R(_BAT, charging_max_voltage) \ + _ATTR_R(_BAT, design_capacity) \ + _ATTR_R(_BAT, cycle_count) \ + _ATTR_R(_BAT, temperature) \ + _ATTR_R(_BAT, serial) \ + _ATTR_R(_BAT, manufacture_date) \ + _ATTR_R(_BAT, first_use_date) \ + _ATTR_R(_BAT, dump) + +/* Define several macros we will feed into FOREACH_BAT_ATTR: */ + +#define DEFINE_BAT_ATTR_RW(_BAT,_NAME) \ + static struct bat_device_attribute dev_attr_##_NAME##_##_BAT = { \ + .dev_attr = __ATTR(_NAME, 0644, show_battery_##_NAME, \ + store_battery_##_NAME), \ + .bat = _BAT \ + }; + +#define DEFINE_BAT_ATTR_R(_BAT,_NAME) \ + static struct bat_device_attribute dev_attr_##_NAME##_##_BAT = { \ + .dev_attr = __ATTR(_NAME, 0644, show_battery_##_NAME, 0), \ + .bat = _BAT \ + }; + +#define REF_BAT_ATTR(_BAT,_NAME) \ + &dev_attr_##_NAME##_##_BAT.dev_attr.attr, + +/* This provide all attributes for one battery: */ + +#define PROVIDE_BAT_ATTRS(_BAT) \ + FOREACH_BAT_ATTR(_BAT, DEFINE_BAT_ATTR_RW, DEFINE_BAT_ATTR_R) \ + static struct attribute *tp_bat##_BAT##_attributes[] = { \ + FOREACH_BAT_ATTR(_BAT, REF_BAT_ATTR, REF_BAT_ATTR) \ + NULL \ + }; \ + static struct attribute_group tp_bat##_BAT##_attribute_group = { \ + .name = "BAT" #_BAT, \ + .attrs = tp_bat##_BAT##_attributes \ + }; + +/* Finally genereate the attributes: */ + +PROVIDE_BAT_ATTRS(0) +PROVIDE_BAT_ATTRS(1) + +/* List of attribute groups */ + +static struct attribute_group *attr_groups[] = { + &tp_root_attribute_group, + &tp_bat0_attribute_group, + &tp_bat1_attribute_group, + NULL +}; + + +/********************************************************************* + * Init and cleanup + */ + +static struct attribute_group **next_attr_group; /* next to register */ + +static int __init tp_init(void) +{ + int ret; + printk(KERN_INFO "tp_smapi " TP_VERSION " loading...\n"); + + ret = find_smapi_port(); + if (ret < 0) + goto err; + else + smapi_port = ret; + + if (!request_region(smapi_port, 1, "smapi")) { + printk(KERN_ERR "tp_smapi cannot claim port 0x%x\n", + smapi_port); + ret = -ENXIO; + goto err; + } + + if (!request_region(SMAPI_PORT2, 1, "smapi")) { + printk(KERN_ERR "tp_smapi cannot claim port 0x%x\n", + SMAPI_PORT2); + ret = -ENXIO; + goto err_port1; + } + + ret = platform_driver_register(&tp_driver); + if (ret) + goto err_port2; + + pdev = platform_device_alloc("smapi", -1); + if (!pdev) { + ret = -ENOMEM; + goto err_driver; + } + + ret = platform_device_add(pdev); + if (ret) + goto err_device_free; + + for (next_attr_group = attr_groups; *next_attr_group; + ++next_attr_group) { + ret = sysfs_create_group(&pdev->dev.kobj, *next_attr_group); + if (ret) + goto err_attr; + } + + printk(KERN_INFO "tp_smapi successfully loaded (smapi_port=0x%x).\n", + smapi_port); + return 0; + +err_attr: + while (--next_attr_group >= attr_groups) + sysfs_remove_group(&pdev->dev.kobj, *next_attr_group); + platform_device_unregister(pdev); +err_device_free: + platform_device_put(pdev); +err_driver: + platform_driver_unregister(&tp_driver); +err_port2: + release_region(SMAPI_PORT2, 1); +err_port1: + release_region(smapi_port, 1); +err: + printk(KERN_ERR "tp_smapi init failed (ret=%d)!\n", ret); + return ret; +} + +static void __exit tp_exit(void) +{ + while (next_attr_group && --next_attr_group >= attr_groups) + sysfs_remove_group(&pdev->dev.kobj, *next_attr_group); + platform_device_unregister(pdev); + platform_driver_unregister(&tp_driver); + release_region(SMAPI_PORT2, 1); + if (smapi_port) + release_region(smapi_port, 1); + + printk(KERN_INFO "tp_smapi unloaded.\n"); +} + +module_init(tp_init); +module_exit(tp_exit); diff --git a/fs/exec.c b/fs/exec.c index 65eaacaba4f4..1d3b310bd5f0 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -63,6 +63,8 @@ #include #include +#include + #include #include #include @@ -866,9 +868,12 @@ static struct file *do_open_execat(int fd, struct filename *name, int flags) if (err) goto exit; - if (name->name[0] != '\0') + if (name->name[0] != '\0') { fsnotify_open(file); + trace_open_exec(name->name); + } + out: return file; diff --git a/fs/open.c b/fs/open.c index cb81623a8b09..a92b0f6061ac 100644 --- a/fs/open.c +++ b/fs/open.c @@ -34,6 +34,9 @@ #include "internal.h" +#define CREATE_TRACE_POINTS +#include + int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs, struct file *filp) { @@ -1068,8 +1071,11 @@ long do_sys_open(int dfd, const char __user *filename, int flags, umode_t mode) long do_sys_open(int dfd, const char __user *filename, int flags, umode_t mode) { + struct filename *tmp; + tmp = getname(filename); struct open_how how = build_open_how(flags, mode); return do_sys_openat2(dfd, filename, &how); + trace_do_sys_open(tmp->name, flags, mode); } diff --git a/include/trace/events/fs.h b/include/trace/events/fs.h new file mode 100644 index 000000000000..fb634b74adf3 --- /dev/null +++ b/include/trace/events/fs.h @@ -0,0 +1,53 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM fs + +#if !defined(_TRACE_FS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_FS_H + +#include +#include + +TRACE_EVENT(do_sys_open, + + TP_PROTO(const char *filename, int flags, int mode), + + TP_ARGS(filename, flags, mode), + + TP_STRUCT__entry( + __string( filename, filename ) + __field( int, flags ) + __field( int, mode ) + ), + + TP_fast_assign( + __assign_str(filename, filename); + __entry->flags = flags; + __entry->mode = mode; + ), + + TP_printk("\"%s\" %x %o", + __get_str(filename), __entry->flags, __entry->mode) +); + +TRACE_EVENT(open_exec, + + TP_PROTO(const char *filename), + + TP_ARGS(filename), + + TP_STRUCT__entry( + __string( filename, filename ) + ), + + TP_fast_assign( + __assign_str(filename, filename); + ), + + TP_printk("\"%s\"", + __get_str(filename)) +); + +#endif /* _TRACE_FS_H */ + +/* This part must be outside protection */ +#include diff --git a/include/linux/thinkpad_ec.h b/include/linux/thinkpad_ec.h new file mode 100644 index 000000000000..1b80d7ee5493 --- /dev/null +++ b/include/linux/thinkpad_ec.h @@ -0,0 +1,47 @@ +/* + * thinkpad_ec.h - interface to ThinkPad embedded controller LPC3 functions + * + * Copyright (C) 2005 Shem Multinymous + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _THINKPAD_EC_H +#define _THINKPAD_EC_H + +#ifdef __KERNEL__ + +#define TP_CONTROLLER_ROW_LEN 16 + +/* EC transactions input and output (possibly partial) vectors of 16 bytes. */ +struct thinkpad_ec_row { + u16 mask; /* bitmap of which entries of val[] are meaningful */ + u8 val[TP_CONTROLLER_ROW_LEN]; +}; + +extern int __must_check thinkpad_ec_lock(void); +extern int __must_check thinkpad_ec_try_lock(void); +extern void thinkpad_ec_unlock(void); + +extern int thinkpad_ec_read_row(const struct thinkpad_ec_row *args, + struct thinkpad_ec_row *data); +extern int thinkpad_ec_try_read_row(const struct thinkpad_ec_row *args, + struct thinkpad_ec_row *mask); +extern int thinkpad_ec_prefetch_row(const struct thinkpad_ec_row *args); +extern void thinkpad_ec_invalidate(void); + + +#endif /* __KERNEL */ +#endif /* _THINKPAD_EC_H */